I continue my series about abandoned places here at Svalbard. This time there is also an abandoned Soviet mining town I want to present. Previous post about Coles Bay is closely related to Grumant. And I encourage you to read it first. Urban/Rural exploration is a nice hobby that combines photography and my fascination with abandoned human activity. I urge people to experience these places but to explore carefully and not damage anything.
There are no fences around Grumant or other obstacles that keeps you out of Grumant, however the settlement is quite inaccessible. The safest route is probably by boat in the summer time. It is less than 20km one way and should not take long. There is not a particularly good harbor in the area around Grumant, and I recommend that you enter at calm sea. The other routes on foot in summer time and by snowmobile in winter is both dangerous and difficult for most people. I would not describe them here considering what situation people might put themselves in. No liner or regular tours go there. It is best if visitors acquire a local tour guide who is willing to show you Grumant.
As described in my previous article about Coles Bay, Grumant and Coles Bay was connected by railway. Grumant had a poor harbor and Coles Bay suited much better for shipment of coal and other transport that went by sea. Grumant is a small town between high mountains near the Icefjord, and at the most there were 1,100 residents in the 50s. Grumant had the coal-mine entrances and other buildings with related industrial workplaces. In addition the workers had their living quarters in that narrow valley. I am lucky to have lived in a time that we still could visit the houses and see the beautiful wall paintings and ceiling decorations. It is clear that they had a canteen there and a building for either an infirmary or a kindergarten. Maybe both!
There are not many buildings left in Grumant and those still standing are in a miserable condition. It is especially the severe weather conditions that is the problem. Roofs have collapsed, erosion from the seaside has came dangerously close to the buildings and the permafrost is constantly moving the ground under the houses. Slowly, but surely this destroys the concrete structures in Grumant. Considering the condition I would discourage people to enter in the buildings that still stand.
“Take nothing but pictures. Leave nothing but footprints” Is a good rule to follow. These places exist because there was activity in the area and the facilities and location served people a purpose. Today they are a memory of a bygone era. Let us not destroy them or affect them in any way with today’s activity.
When I did the research to buy my first medium format camera, I quickly came to the Fuji rangefinder series. If you read forums and other online sources, good things are often written about the Texas Leica (as it is also known as). When looking to other 135 film rangefinders the GW690 is huge and bulky, but compared with many other medium-format cameras, the GW690 series has a manageable size and are reasonably priced. My photos is mainly taken in the field, so I depend on being able to carry it in my backpack among thermos and lunch. Size matters. I prefer the 2:3 format and a positive feature is that each frame measures 6 x 9 cm. One can easily make large prints from a picture made with the GW690. All this together the Fuji GW690 stood out to me as a good first buy, and the search for a good item started at ebay. Finally, I landed on a camera for sale in Japan. And after a few weeks of waiting, I received a third generations GW690 camera in mail here at Svalbard.
This rangefinder series from fuji (fujica) was introduced in the late 70s and was produced until 90s. All the pictures and tests I have done is with a third generation GW690 made in 1992. The camera has a very good fixed prime lens at 90mm with leaf shutter integrated between the glasses. The aperture goes from f/3.5 to f/32 and shutter speed between 1s and 1/500s. The lens has a somewhat long minimum focusing distance of just 1 meter. Other things worth mentioning is that the camera has a hotshoe for flash, a lock on the trigger, and a built in retractable lens hood. The lens has inner threads with 67mm diameter for your ND or color filters.
What I like the most with this camera is the huge negative it produces. 6 cm x 9 cm is the biggest size negative one can make on a medium format camera. If you want a larger format than that you need to scale up to large format cameras (4×5″ for example). And that is a different ball game.
What I liked least about this camera is that I find it a bit difficult to achieve focus. The yellow spot focus area is tiny, and I need to search around the image to find a suitable place to align the “double image”. It is tough in a low contrast scenery and bit difficult on a tripod.
After shooting approximately 20+ rolls of 120 film, I have discovered a little light leak which appears in the bottom of the image. I have solved this easily with electrical tape. The workaround has not been a major problem for me. One can expect such error with old cameras, and if it bothers me too much I will replace the gasket with a new one. I have really enjoyed this camera and think it should run a great deal of rolls before I switch to other medium format cameras. The camera has been perfect as a introduction to the medium format. I have learned a lot with the fact that the settings are all manual. This is probably not the camera for the person who takes pictures of fast moving scenes or prefer full automation. With this camera one must think carefully and use some time before the photo is taken.
Urban/rural exploration has been a hobby that has given me much joy over the years. Both the historical aspect of it and the joy of taking pictures and documenting old ruins. Svalbard has many such places, and I thought it was a good idea to introduce them here. Maybe others will have an interest in visiting these places as well? Coles Bay is one of the abandoned settlement that is easiest to visit, and I thought to introduce it first.
What is it: Coles Bay area has a history of Norwegian trappers dating back to 19th century, but the buildings and ruins we see today stems from the Soviet mining operations that came later in the 20. century. Coles Bay and Grumant further north was linked by railways. Coles Bay had a good harbor and functioned as an export port for the Grumant settlement. Grumant and Coles Bay had a total of over 1,100 inhabitants at its peak in 1951-1952.
What to explore: In the area there are about 10 to 12 large and small buildings that are more or less intact. Several ruins can also be seen in the area. There are two ports in Coles Bay and at one of them lies a shipwreck half sunk. Traces of the old railway is seen north-west of town going toward Grumant. The old power plant and the graveyard is seen in easterly direction from the main buildings.
Condition: Most buildings have roofs intact but may have such a state that those are not recommended to enter. Some houses have locked doors and windows in good condition, while the other houses are open. Intrusion by force to closed buildings is not ok.
How to get there: You can travel to Coles Bay with either boat in the summer time or snowmobile in the winter time. Coles Bay has a good harbour and is a safe lie in. The trip from Longyearbyen by boat is approximately 25 kilometers one way. No liner go there ohwever regular tours go there in winter time. In winter you can travel with snowmobile over the mountains near Longyearbyen and down Colesdalen. Also about 25 km one way. It is recommended to travel with a local guide to get to Coles Bay. Hiking between Longyearbyen and Coles Bay is not recommended. At least not for people without mountain experience.
“Take nothing but pictures. Leave nothing but footprints” Is a good rule to follow. These places exist because there was activity in the area and the facilities and location served people a purpose. Today they are a memory of a bygone era. Let us not destroy them or affect them in any way with today’s activity. Be careful.
I have done another toning test similar to the tea toning test I did before Christmas. I used the same concentration of washing soda for bleaching and the same type of watercolour paper (Arches satin hot pressed 300g).
The recipe is as follows:
Bleach bath: 1 teaspoon Sodium Carbonate (washing soda) for each liter hot water. I mixed up 3 liters.
Toning bath: 3 tablespoons instant coffee (Nescafe gold) for each liter hot water. Also 3 liters in total.
Cool down the bleach and toning bath to room temperature before starting the process. I have been precise when it come to the timing. Especially with the bleach bath. A few seconds longer or shorter time submerged in bleach will produce a noticeable difference in the result. I might consider using a lower concentration on the bleach. I think it should make it easier to get the best result. Golden in the highlights and purple in the shadows is what I try to achieve. Another important ting is the pre-soaking in water (1 minute) and thoroughly cleanse between bleach and toning.
Early 2016 I placed six pinhole cameras in the terrain around Longyearbyen, and let them collect sunlight for about one year. The cameras were made from a beer can with a photographic paper curled inside the can and with a small pinhole to let in sunlight. Apart from the pin hole, the camera was lightproof and mounted on a wooden frame.
When I collected the cameras I soon understood that I had made a mistake. The sun and weather has dried and cracked the wooden frame and it must have caused a movement to the camera during the exposure time. I saw warped wood on all six of my pinhole cameras. The picture below is the one with least movement.
Some edit is needed in lightroom and/or photoshop:
This last image is the original photographic paper straight from the pinhole camera to the flat bed scanner. No development or other chemicals added. If the paper is submerged in developer it will turn completely black. Don’t do that!
Lesson learned: Create a better foundation for the camera. It must withstand the weather conditions without creating any movement. One year is too long to wait to find out that one has camera movements …